24V 3A switching power supply module 72W medical device power supply AC220V-DC24V

>> Projector/Stage/Medical light source&Driver

24V 3A switching power supply module 72W medical device power supply AC220V-DC24V

24V 3A switching power supply module 72W medical device power supply AC220V-DC24V

Technical Parameter:

	Model No.:	MOL-U60S5	MOL-U65S12	MOL-U65S15	MOL-U65S24	MOL-U65S36	MOL-U65S48
Output characteristics	Output Voltage	5V	12V	15V	24V	36V	48V
	Rated current	8A	5A	4A	2.5A	2A	1.5A
	Current range	0-10A	0-5.5A	0-4.5A	0-3A	0-2.2A	0-1.5A
	Ripple	<100 mVp-p	<100 mVp-p	<130 mVp-p	<130 mVp-p	<220 mVp-p	<200 mVp-p
	Output Precision	±1%	±1%	±1%	±1%	±1%	±1%
	Voltage regulation rate	±1%	±1%	±1%	±1%	±1%	±1%
	load Adjustment rate	±1%	±1%	±1%	±1%	±1%	±1%
	Rated Power	40W	60W	60W	60W	72W	72W
	Adjustable output range	Can choose the adjustable or fixed constant voltage output
	Build, rise, hold time	300ms, 50ms, 50ms/220VAC
Input characteristics	Input voltage range	100-264V AC
	Input Current	<1.0A (Average current 0.4-0.9A)
	Frequency Range	47-63HZ
	Efficiency	74%	81%	82.50%	84.50%	87.60%	88%
	Starting impulse current	cold start <50A/230VAC
	Leakage current	<0.6mA/220VAC
Protection characteristics	Over power protection	150-170% rated power,Automatic recovery after fault removal
	Overvoltage protection	VH1:>50%
	DC short circuit protection	power supply Intermittent Gap,Power recovery after Eliminate short circuits
Environmental parameters	Working temperature, humidity	_15℃ - +50℃ @100% load, +60℃ @60% load; 20%-90% RH
Environmental parameters	Storage temperature, humidity	_20℃- +85℃ 10%-95% RH
Safety and EMC standards	EMI safety standards	MEET Gb4943
	Withstand voltage	I/P-O/P:2.5KVAC 1min
	Insulation resistance	I/P-O/P: 500VDC/100M Ohms
Other	Dimension	108x62x30mm
Other	Weight	146g
Remarks	1.All technical parameters are measured under the condition of 220VAC input, Rated load environment 25℃, Humidity 70%.
	2.Precision: Including setting tolerance, voltage adjustment rate, load adjustment rate.
	3.Ripple test: Use the twisted wire of 30cm to connect power supply and load,
	0.1uF and 47uF capacitors on the load side, Measured with a 20MH oscilloscope at the load end.
	4.Voltage regulation rate: Under rated load conditions, the input voltage is measured from low to high.
	5.Load Regulation rate: The measured output changes from 0% load to 100% load.
	6.Every line Can output maximum current, but the total load cannot exceed the maximum output power.

Dimension:

Inquiry

We are exporting LED prodcuts to all over the world, please don’t hesitate to contact us for any inquiry or suggestion, and you will receive our prompt reply within 24 working hours.

Subject:

E-mail:

Tel:

Message:

Verify Code: